Big Power 100W 150W 200W 250W 300W Soldering Iron
Big Power 100W 150W 200W 250W 300W Soldering Iron,
110-240V Solder Pencil, 200W Soldering Iron,
Features:
•Premium and high-performance.
•With chisel point tip, mini stand and plastic handle.
•Heat and impact-resistant handle.
•General or long-life tip with mica heater.
•Power options: 50W 80W 100W 150W 200W 300W
•With a power switch on the handle ensures easy and safe operation.
•Ideal for different soldering work, like metal tube or big components.
•The high temperature brought by the big power soldering iron ensures the smooth flow of the solder to get good soldering performance.
•Different powers from 50W to 300W and an assortment of tips is available(curved, straight, normal and long life)
•Special iron stand ZD-11H included for 150W,200W and 300W
•Insulated handle ensures good protection from heat and comfortable feel
•Compact design and heavy-duty
Specification
Code |
Voltage |
Power |
Spare tip |
Tip code |
Tip size |
88-7431 |
110-130V |
50W |
B3 |
79-2313/79-2310 |
φ5.8 |
88-7432 |
220-240V |
50W |
B3 |
||
88-7433 |
110-130V |
80W |
B5 |
79-2513/79-2510 |
φ7.8 |
88-7434 |
220-240V |
80W |
B5 |
||
88-7435 |
110-130V |
100W |
B9 |
79-2913/79-2910 |
φ9.8 |
88-7436 |
220-240V |
100W |
B9 |
||
88-7437 |
110-130V |
15W |
W3 |
79-8735 |
Φ11.8
|
88-7438 |
220-240V |
150W |
W3 |
||
88-7439 |
110-130V |
200W |
W4 |
79-8736 |
Φ14
|
88-7440 |
220-240V |
200W |
W4 |
||
88-7441 |
110-130V |
300W |
W5 |
79-8737 |
Φ16.8 |
88-7442 |
220-240V |
300W |
W5 |
Attention
On first time use the soldering iron may produce smoke, this is just grease used in manufacturing burning off. It is normal and should only last for about 10 minutes. It is not harmful to the product or user.
Care of the tip
•Always keep the tip coated with tin to ensure a long service life. •Do not keep the iron at high temperature for a long time •Never clean the tip with coarse materials •Never cool it in water. •Remove the tip and clean every twenty hours of use, or at least once a week, and remove any loose built up in the barrel. •Do not use fluxes containing chloride or acid. Use only rosin or activated resin fluxes. •Do not use any compound or anti-seize materials •Handle the heated soldering iron with extreme care, as the high temperature of the iron can cause fires or painful burns. •Never file the specially-plated tip.
Maintenance
•This tool must be placed on its stand when not in use. •If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid hazard.
Operation
•1)File off any dirt, rust or paint on the part you wish to solder. •2)Heat the part with the soldering iron. •3)Apply rosin-based solder to the part and melt it with the soldering iron. •Note: when using non-rosin-based solder, be sure to apply a soldering paste to the part before applying the solder. •4)Wait for the solder to cool and harden before moving the soldered part.
Tip replacement
Note: Tip replacement or cleaning should be done only when the iron is at room temperature or below. After removing tip, remove any oxide dust that may have formed in the tip retaining area of the barrel. Be careful to avoid getting dust in your eyes. Care should be taken not to over tighten as this would damage the element.
General cleaning
The outer case of the iron or station may be cleaned with a damp cloth using small amounts of liquid detergent Never submerse the unit in liquid or allow any liquid to enter the housing. Never use solvent to clean the case.
Warning
•The appliance is not a toy, and must be kept out of children’s hands. •Before cleaning the appliance or changing the filter, always remove the power lead plug from the socket. Unscrewing the housing is not permitted. •This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. •Children should be supervised to ensure that they do not play with the appliance. •If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Package |
Qty/Carton |
Carton Size |
N.W. |
G.W. |
Power |
Blister Box |
50pcs |
46*34*41.5cm |
12kgs |
13kgs |
50W |
50pcs |
46*34*41.5cm |
15kgs |
17kgs |
80/100W |
|
20pcs |
35*21.5*36.5cm |
9kgs |
10kgs |
150W |
|
20pcs |
38.5*21.5*36.5cm |
11kgs |
12kgs |
200W |
|
20pcs |
42.5*21.5*36.5cm |
11kgs |
12kgs |
300W |
www.china-zhongdi.com
Ningbo Zhongdi Industry & Trade Co.,Ltd, a professional manuacturer of soldering station and soldering iron for almost 30 years.
Export to all over the world, rich experience with various customers.
Europe and North America covers most of our sales revenue.