High reputation Soldering Gun Kit - Zhongdi ZD-555 Soldering Gun with Solder Wire Feeder – zhongdi

Features

•Soldering Gun with Solder wick feeder of Ningbo ZD (ZD-555)
•Two in one design. Perfect combines the soldering iron and the soldering wire feeder. You can operate it with single handle.
•Trigger upward, the soldering wire will be fed to the tip continuously.
•Solder feed control device can precisely adjust the solder wire amount feeding to the tip(sized from 0.8mm-1.5m).
•Dual Hi/Low powers(30W/60W) is designed for convenient operation
•One handed trigger action for feeding solder.
•Rubber handle offer comfortable touch and pleasing appearance.
Product includes:
•Tin wire gun x1
•solder wire 0.8-1.5mm*2M  x1

Spare tips

Spare Parts :

1. Soldering wire spool
2. Spool fixing
3. Trigger
4. Button
5. High/Low/Off switch

Operation

•Feed the soldering wire into soldering wire spool(1) and fix it with spool fixing(2).
•Press the button(4) and insert the wire into the hole at the back.
•Pull the trigger(3) until the wire reaches the tip at the front.
•Plug it in and switch it on(5). Your soldering work is ready to go.

Warning:

•It is normal that the soldering iron will smoke slightly during the first use. This is caused by the initial heating of electronic components within the iron. The smoke will disappear after 10 minutes.
•Ensure the iron is only plugged into a mains socket, failure to do so may result in reduced performance or damage to the iron, equipment or injury to you or other person(s).
•Ensure the soldering iron is kept in a dry environment. It is not suitable for use outside or working over wet conditions.
•The soldering iron should not be dropped, dismantled or modified.
•If the soldering tip does not solder your component, please tin the tip with solder paste or use a tip cleaner for better performance.
•Never dip the tip in muriatic acid. Failure to do this will result in erosion and affect usage.
•Always keep the tip coated with tin to ensure a long life.
•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
•Children should be supervised to ensure that they do not play with the appliance.
•If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.