Manufacturer for Hot Air SMD Rework Station - Zhongdi ZD-8905 Pyrography Tool Wood Burning Station 40W Engraving the Wood, Cutting Plastic Board and Foam – zhongdi

Specification

•Voltage: 110-130V or 220-240V
•Temperature setting range 450°C – 750°C Power consumption: 40W
•Iron voltage: 1.6V AC
•Goes with 1 standard tip D2-5

Eight different tips for option:

Special plug to match with the socket

Rotary temperature setting

Power start button on the handle

Before first Use

•Take the unit out of the package and dispose of the packaging material (e. g. plastic bags) or store it out of children’s reach. There is a danger of suffocation!
•Place the soldering station on a level, solid surface and plug it in.

Operation

•Switch it on and the indicator will light up.
•Set the temperature by knob .
•Perform the pyrography by engraving on materials such as wood, cord or leather.
•Turn off the soldering station and allow it to fully cool down before storage.
•Operation cycles: operate with 30 seconds on and 30 seconds off to prevent over-heating.
•The temperature at the tip can reaches at least 300 °C at the end of the first on-period.

Inserting/Changing the Soldering Tip:
•Please Note! Allow the soldering iron to cool down completely after use before touching the soldering tip or the heating element. There is risk of injury!
•Unscrew the tip and replace it with a new one.
•Screw the new tip with a screwdriver manually and do not over tighten it.