Zhongdi ZD-99 Temperature Adjustable Soldering Station,
48W 58W Soldering Station, Small Soldering Machine 110-240V, Temperature Adjustable Solder,

Features:

•Ideal for hobbyists with basic functions.
•On/off switch with a power indicator.
•High-quality and light pencil-shaped iron.
•Cushioned foam grip with replaceable heating element.
•Includes a high quality soldering iron tip, iron holder, and a sponge for cleaning the tip.
•Heater: mica, 150°C – 480°C (48W), 150°C -520°C(58W)
•Temperature control with a knob

Specifications

Operation

•Unpack the soldering station and check all parts. Damaged parts must not be put into operation.
•Put the holding rack for the soldering iron sideways in the soldering station, wet the cleaning sponge in the sponge rack with water.
•Put the soldering iron in the holding rack
•Place the soldering station on a solid and dry surface.
•Connect the mains plug to a socket and turn on the soldering station by using the power switch (I=ON/0=OFF).When turned on, the power switch is lit
•Always put the soldering iron on the holding rack when it is heating up or during breaks from soldering
•Make sure the workbench for soldering is clean
•Only use solder for electronics. Acidic solder can damage the soldering tip or the work piece
•Regulate the desired temperature of the soldering iron with the adjusting knob.
•The color-coded areas are equal to following temperatures:
•Yellow≥160℃
•Light Orange 180℃ to 350℃
•Deep Orange 350℃ to 450℃
•Red≥550℃
•Lower the temperature during breaks, this saves energy and extends the durability of the soldering tip.
•Wait for about 10 minutes until the soldering tip reaches the setting temperature, test the temperature by touching the soldering tip with solder. If the solder melts away easily, you can start soldering.
•Tin the hot soldering tip with solder; wipe off excessive solder on the wet cleaning sponge.
•Heat up the to-be-soldered part with the soldering tip and add solder.
•Wait for the hot solder to cool down.
•Clean the soldering tip on the wet sponge after each soldering
•After the soldering is done, put back the soldering iron in the rack and turn off the soldering Station at the main switch.
•Do not file off the soldering tip, or it will be damaged.
•Never touch the hot soldering tip.
•Let the soldering iron cool down after use.
•The soldering iron should not be dunked into water
•During breaks, the soldering iron has to be placed in the holding rack.

Ningbo Zhongdi Industry & Trade Co.,Ltd, a professional manufacturer of sodering station, soldering iron and soldering related products for more than 25 years.

www.china-zhongdi.com for more info.